Skip to content
Tech Docs

Alert

Device Alert

Section titled “Device Alert”

These are generated by the device itself based on its built-in hardware or firmware logic, such as speeding or blind spot detection. A device will report these alerts regardless of the platform it is connected to.

Platform Alert

Section titled “Platform Alert”

Platform-calculated alerts are generated by the platform based on secondary calculations of data reported by the device. The calculation rules and alert types may differ between platforms.

Customized Alert

Section titled “Customized Alert”

Administrators can configure these alerts in the Customer Management System (CMS) according to business needs. They are sent immediately when trigger conditions are met.

Customized Alert Customized alert added by the platform on top of existing ones.

Customized Rule

Section titled “Customized Rule”

Users can configure complex rules in the Customer Management System (CMS) based on devices, alerts, and geofences. When a rule is triggered, the system sends an alert notification.

Customized Rule Complex rule in the platform that combine alerts, geofences, and time restrictions.

ADAS Alerts

Section titled “ADAS Alerts”

Forward Collision

Section titled “Forward Collision”
  • Source: Device

Lane Shift

Section titled “Lane Shift”
  • Source: Device

Too Close

Section titled “Too Close”
  • Source: Device

Pedestrian Collision

Section titled “Pedestrian Collision”
  • Source: Device

Driver Change

Section titled “Driver Change”
  • Source: Device

BSD Alerts

Section titled “BSD Alerts”

Back BSD

Section titled “Back BSD”
  • Source: Device

Left BSD

Section titled “Left BSD”
  • Source: Device

Right BSD

Section titled “Right BSD”
  • Source: Device

Front BSD

Section titled “Front BSD”
  • Source: Device

DEVICE Alerts

Section titled “DEVICE Alerts”

Idle Speed Alarm

Section titled “Idle Speed Alarm”
  • Source: Platform Calculated
  • Trigger Rule: The device speed remains below 5km/h for 3 consecutive minutes with the ACC in the ON state.
  • End Rule: The ACC changes to OFF or the speed exceeds 5km/h.

Video Signal Lost

Section titled “Video Signal Lost”
  • Source: Device

Spare Memory Fault

Section titled “Spare Memory Fault”
  • Source: Device

Main Memory Fault

Section titled “Main Memory Fault”
  • Source: Device

Device Vibration

Section titled “Device Vibration”
  • Source: Device

Device Tamper

Section titled “Device Tamper”
  • Source: Device

Device Drift

Section titled “Device Drift”
  • Source: Device

Device Power Outage

Section titled “Device Power Outage”
  • Source: Device

Low External Power

Section titled “Low External Power”
  • Source: Device

Low Power Protection

Section titled “Low Power Protection”
  • Source: Device

Low Internal Power

Section titled “Low Internal Power”
  • Source: Device

Exit Geo-fence

Section titled “Exit Geo-fence”
  • Source: Platform Calculated
  • Trigger Rule: The device’s location information leaves the customer-created geofence.

Enter Geo-fence

Section titled “Enter Geo-fence”
  • Source: Platform Calculated
  • Trigger Rule: The device’s location information enters the customer-created geofence.

Device Offline

Section titled “Device Offline”
  • Source: Platform Calculated

ACC On

Section titled “ACC On”
  • Source: Platform Calculated
  • Trigger Rule: The device’s ACC status changes to on.

ACC Off

Section titled “ACC Off”
  • Source: Platform Calculated
  • Trigger Rule: The device’s ACC status changes to off.

I/O On

Section titled “I/O On”
  • Source: Platform Calculated
  • Trigger Rule: The device’s I/O status changes to connected.

I/O Off

Section titled “I/O Off”
  • Source: Platform Calculated
  • Trigger Rule: The device’s I/O status changes to disconnected.

Passenger Overload Alarm

Section titled “Passenger Overload Alarm”
  • Source: Platform Calculated
  • Trigger Rule: The current number of passengers in the vehicle exceeds the set maximum passenger capacity.
  • End Rule: The number of passengers is less than or equal to the maximum capacity, or the passenger overload end time is exceeded.

Unscheduled Alarm / Unplanned Alarm

Section titled “Unscheduled Alarm / Unplanned Alarm”
  • Source: Platform Calculated
  • Trigger Rule: An ACC ON event is reported by the device, but the current time is outside of any preset work schedule.
  • End Rule: The time reported by the device is within the work schedule, or an ACC OFF is reported outside of the schedule.

I/O Alerts

Section titled “I/O Alerts”

Power Cut Off

Section titled “Power Cut Off”
  • Source: Device

SOS Alarm

Section titled “SOS Alarm”
  • Source: Device

DMS Alerts

Section titled “DMS Alerts”

Driver ID Detection

Section titled “Driver ID Detection”
  • Source: Device

Fatigue Driving

Section titled “Fatigue Driving”
  • Source: Device

Phone Calling

Section titled “Phone Calling”
  • Source: Device

Smoking

Section titled “Smoking”
  • Source: Device

Distracted Driving

Section titled “Distracted Driving”
  • Source: Device

No Driver Detected

Section titled “No Driver Detected”
  • Source: Device

Hand Off Detection (HOD)

Section titled “Hand Off Detection (HOD)”
  • Source: Device

Infrared Blocking

Section titled “Infrared Blocking”
  • Source: Device

Play Phone

Section titled “Play Phone”
  • Source: Device

Seat-Belt Detection

Section titled “Seat-Belt Detection”
  • Source: Device

Camera Blocked

Section titled “Camera Blocked”
  • Source: Device

Alcohol Detection Alarm

Section titled “Alcohol Detection Alarm”
  • Source: Device
  • Trigger Rule: An alarm is generated when the alcohol concentration value (BAC) detected by the device is greater than or equal to the preset threshold.

GSENSOR Alerts

Section titled “GSENSOR Alerts”

Rollover

Section titled “Rollover”
  • Source: Device

Crash

Section titled “Crash”
  • Source: Device

Rapid Acceleration

Section titled “Rapid Acceleration”
  • Source: Device

Rapid Deceleration

Section titled “Rapid Deceleration”
  • Source: Device

Sharp Turn

Section titled “Sharp Turn”
  • Source: Device

POSITION Alerts

Section titled “POSITION Alerts”

Fatigue Warning

Section titled “Fatigue Warning”
  • Source: Device

Fatigue Alarm

Section titled “Fatigue Alarm”
  • Source: Device

Driving Overtime

Section titled “Driving Overtime”
  • Source: Device

Enter GPS Blind Zone

Section titled “Enter GPS Blind Zone”
  • Source: Track series device
  • Trigger Rule: The device begins to upload real-time coordinate points that are not located.

Exit GPS Blind Zone

Section titled “Exit GPS Blind Zone”
  • Source: Track series device
  • Trigger Rule: The device transitions from uploading non-located coordinate points to uploading located coordinate points.

GPS Blind Zone Alert

Section titled “GPS Blind Zone Alert”
  • Source: Platform Calculated
  • Trigger Rule: The device begins to upload real-time coordinate points that are not located.
  • End Rule: The device begins to upload real-time coordinate points that are located.

SPEED Alerts

Section titled “SPEED Alerts”

High Speed Warning

Section titled “High Speed Warning”
  • Source: Device

High Speed Alarm

Section titled “High Speed Alarm”
  • Source: Device

Overtime Parking

Section titled “Overtime Parking”
  • Source: Device